Headlamp replacement

From WikiLEC

Jump to: navigation, search

An easy job if you're a double jointed midget apparently:


"I've found it best to manually wind the pod up half way then reach in from the side while looking through the slot at the top. Still helps if you have about 3 elbows though." and "It should be easy but rarely is. It's one of these jobs that you can get right 1st time or spend absolutely ages - particularly with the spring clip."


Or if you've got fingers like pigs tits:


"Wind the pods up, there are three screws in the front of the reflector unscrew do not confuse with the three adjustment screws and remove whole reflector from inside the pod place in your lap and change the bulb making sure it is seated properly."

Personal tools